Show Ip Ospf Routes - Dell S4810 Reference Manual

20.20.20.1
Dell#

show ip ospf routes

Display routes OSPF calculates and stores in OSPF RIB.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] routes
Parameters
process-id
vrf vrf-name
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
Usage
This command is useful in isolating routing problems between the OSPF and the
Information
RTM. For example, if a route is missing from the RTM/FIB but is visible from the
display output of this command, the problem is with downloading the route to the
RTM.
This command has the following limitations:
Open Shortest Path First (OSPFv2 and OSPFv3)
1 FULL/DROTHER00:00:36 192.10.10.4 Gi 0/1 0.0.0.1
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followed by the name of the VRF to
show the OSPF RIB information corresponding to the OSPF
processes that are tied to a specific VRF.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
1215