Field
expires
RP
flags
Incoming
interface
RPF neighbor
Outgoing
interface list:
Example
Dell#show ip pim tib
PIM Multicast Routing Table
Flags:D- Dense, S- Sparse, C- Connected, L- Local, P- Pruned,
SPT,
Advertisement,
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP
10.211.2.1, flags: SCJ
10.211.1.2
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
PIM-Sparse Mode (PIM-SM)
Description
Displays the amount of time until the entry expires and is
removed from the database.
Displays the IP address of the RP/source for this entry.
List the flags to define the entries:
•
D = PIM Dense Mode
•
S = PIM Sparse Mode
•
C = directly connected
•
L = local to the multicast group
•
P = route was pruned
•
R = the forwarding entry is pointing toward the RP
•
F = Dell Networking OS is registering this entry for a
multicast source
•
T = packets were received via Shortest Tree Path
•
J = first packet from the last hop router is received and
the entry is ready to switch to SPT
•
K = acknowledge pending state
Displays the reverse path forwarding (RPF) interface towards
the RP/ source.
Displays the next hop from this interface towards the RP/
source.
Lists the interfaces that meet one of the following criteria:
•
a directly connect member of the Group
•
statically configured member of the Group
•
received a (*,G) Join message
R- RP-bit set, F- Register flag, T- SPT-bit set, J- Join
M- MSDP created entry, A- Candidate for MSDP
K- Ack-Pending State
Incoming interface: GigabitEthernet 4/23, RPF neighbor
Outgoing interface list:
GigabitEthernet 8/0
1295