Logging Extended - Dell S4810 Reference Manual

Version 9.0.2.0
Version 9.2(0.0)
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Related
clear logging
Commands
default logging console
setting.
show logging
buffer.

logging extended

Logs security and audit events to a system log server.
Syntax
logging extended
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Usage
This command is available with or without RBAC enabled. When RBAC is enabled
Information
you can restrict access to audit and security logs based on the CLI sessions' user
roles. If extended logging is disabled, you can only view system events, regardless
of RBAC user role.
When you enabled RBAC and extended logging:
•
1588
Introduced on the S6000.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— clears the logging buffer.
— returns the logging console parameters to the default
— displays the logging setting and system messages in the internal
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Only the system administrator role can execute this command.
Simple Network Management Protocol (SNMP) and Syslog