Userrole - Dell S4810 Reference Manual

Command EXEC Privilege
Modes
Command
Version 9.5(0.0)
History
Related userrole, username
Commands

userrole

Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
Parameters
name
inherit existing-
role-name
Defaults none
Command CONFIGURATION
Modes
Command
Version 9.5(0.0)
History
Usage
Instead of using the system defined user roles, you can create a new user role that
Information
best matches your organization. When you create a new user role, you first inherit
permissions from one of the system defined roles. Otherwise you would have to
create a user role from scratch. You then restrict commands or add commands to
that role. For information about this topic, See Modifying Command Permissions
for Roles.
Important Points to Remember
Consider the following when creating a user role:
•
Security
Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Enter a text string for the name of the user up to 63
characters. It cannot be one of the system defined roles
(sysadmin, secadmin, netadmin, netoperator).
Enter the inherit keyword then specify the system defined
role to inherit permissions from (sysadmin, secadmin,
netadmin, netoperator).
Introduced on the Z9000, S6000, S4820T, S4810, MXL.
NOTE: You can change user role permissions on system pre-defined user
roles or user-defined user roles.
Only the system administrator and user-defined roles inherited from the system
administrator can create roles and usernames. Only the system administrator,
security administrator, and roles inherited from these can use the role
1533