Service-Queue - Dell S4810 Reference Manual

Parameters
policy-map-
name
Defaults none
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Usage A single policy-map can be attached to one or more interfaces to specify the
Information service-policy for those interfaces. A policy map attached to an interface can be
modified.
Related
policy-map-output
Commands

service-queue

Assign a class map and QoS policy to different queues.
S4810
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy
qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id
[class-map class-map-name] [qos-policy qos-policy-name]
command.
Parameters
queue-id
class-map
class-map-
name
1356
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— creates an output policy map.
Enter the value used to identify a queue. The range is from 0
to 7.
(OPTIONAL) Enter the keyword class-map then the class
map name assigned to the queue in character format (16
character maximum).
NOTE: This option is available under policy-map-
input only.
Quality of Service (QoS)