Ipv6 Router Ospf - Dell S4810 Reference Manual

Parameters
number
Defaults 1
Command INTERFACE
Modes
Command
Version 9.1.
History
(0.0)
Version
8.3.19.0
Version 7.8.1.0
Version 7.4.1.0
Usage
Setting a priority of 0 makes the router ineligible for election as a Designated
Information
Router or Backup Designated Router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.

ipv6 router ospf

Enable OSPF for IPv6 router configuration.
S4810
Syntax
ipv6 router ospf process-id
To exit OSPF for IPv6, use the no ipv6 router ospf process-id command.
Parameters
process-id
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.1.
(0.0)
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the number as the priority. The range is from 1 to 255.
Introduced on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Enter the process identification number. The range is from 1
to 65535.
Introduced on the S4810 and Z9000.
1245