Dell S4810 Reference Manual page 905

Usage The following describes the show tcp statistics cp command shown in the
Information
following example.
Field
Rcvd:
0 checksum
error...
329 packets...
17 dup...
0 partially...
7 out-of-order...
0 packets with
data after window
0 packets after
close
0 window probe
packets...
41 dup ack...
10184 ack...
Sent:
25 control
packets...
11603 data
packets...
24 data packets
retransmitted
IPv4 Routing
Description
Displays the number and types of TCP packets received by
the switch.
• Total = total packets received
• no port = number of packets received with no
designated port
Displays the number of packets received with the following:
• checksum errors
• bad offset to data
• too short
Displays the number of packets and bytes received in
sequence.
Displays the number of duplicate packets and bytes
received.
Displays the number of partially duplicated packets and
bytes received.
Displays the number of packets and bytes received out of
order.
Displays the number of packets and bytes received that
exceed the switch's window size.
Displays the number of packet received after the TCP
connection was closed.
Displays the number of window probe and update packets
received.
Displays the number of duplicate acknowledgement packets
and acknowledgement packets with data received.
Displays the number of acknowledgement packets and
bytes received.
Displays the total number of TCP packets sent and the
number of urgent packets sent.
Displays the number of control packets sent and the
number retransmitted.
Displays the number of data packets sent.
Displays the number of data packets resent.
905