Show Interfaces Configured - Dell S4810 Reference Manual

MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related

show interfaces configured

Commands
configuration.
show interfaces switchport
show inventory (S-Series and Z-Series)
types, components (including media), Dell Networking OS version including
hardware identification numbers, and configured protocols.
show ip interface
show range
command.
show interfaces configured
Display any interface with a non-default configuration.
S4810
Syntax
show interfaces configured
Command
•
Modes
•
Command
Version 9.0.2.0
History
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.4.1.0
774
– displays Layer 3 information about the interfaces.
– displays all interfaces configured using the interface range
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Changed the organization of the display output.
– displays any interface with a non-default
– displays Layer 2 information about the interfaces.
– displays the S-Series and Z-Series switch
Interfaces