Distribute-List Redistributed-Override - Dell S4810 Reference Manual

Version
8.3.12.0
Version 7.5.1.0
Version 6.3.1.0
Usage You can assign a name to a routing process so a prefix list IS applied to only the
Information routes derived from the specified routing process.
Related
•
Commands
•

distribute-list redistributed-override

Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
S4810
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-
override in command.
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 7.8.1.0
Version 6.3.1.0
Intermediate System to Intermediate System (IS-IS)
Introduced on the S4810.
Added IPv6 ISIS support.
Introduced.
distribute-list in — filters the networks received in updates.
redistribute — redistributes routes from one routing domain to another routing
domain.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Introduced.
969