Max-Age - Dell S4810 Reference Manual

Version 8.3.7.0
Version 7.7.1.0
Version 7.5.1.0
pre-Version
6.2.1.1
Related
forward-delay
Commands
state.

max-age

information.
max-age
To maintain configuration information before refreshing that information, set the time interval for the
spanning tree bridge.
S4810
Syntax
max-age seconds
To return to the default values, use the no max-age command.
Parameters
seconds
Defaults 20 seconds
Command SPANNING TREE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.7.1.0
Spanning Tree Protocol (STP)
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the wait time before STP transitions to the Forwarding
— changes the wait time before STP refreshes protocol configuration
Enter a number of seconds the Dell Networking OS waits
before refreshing configuration information. The range is
from 6 to 40. The default is 20 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
1635