Show Ip Route - Dell S4810 Reference Manual

pre-Version
6.1.1.0
Example
Dell#show ip protocols
Routing Protocol is "bgp 1"
Dell#

show ip route

View information, including how they were learned, about the IP routes on the switch.
S4810
Syntax
show ip route [vrf vrf-name] hostname | ip-address [mask]
[longer-prefixes] | list prefix-list | protocol [process-id |
routing-tag] | all | connected | static | summary]
Parameters
vrf vrf-name
ip-address
mask
longer-prefixes
list prefix-list
protocol
IPv4 Routing
Introduced on the E-Series.
Cluster Id is set to 20.20.20.3
Router Id is set to 20.20.20.3
Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
(OPTIONAL) Enter the keyword vrf and then the VRF name
to list the routes in the route table of a specific VRF.
(OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
(OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
(OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list
(OPTIONAL) Enter the name of a routing protocol (bgp,
isis, ospf, rip) or the keywords connected or static.
command.
NOTE: bgp, isis, ospf, and rip.
895