Show Redundancy - Dell S4810 Reference Manual

show redundancy

Display the current redundancy configuration (status of automatic reboot configuration on stack
management unit).
S4810
Syntax
show redundancy
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.11.1
Version 7.7.1.0
Usage To modify your results, use the show redundancy [pipe] command, as follows:
Information
•
•
•
•
•
Example
Dell#show redundancy
Dell#show redundancy
-- SSeries Redundancy Configuration --
------------------------------------------------
Auto reboot : Enabled
-- Stack-unit Status --
------------------------------------------------
Mgmt ID:
Stack-unit ID:
Stack-unit Redundancy Role: Primary
Stack-unit State:
Stack-unit SW Version:
Link to Peer: Up
-- PEER Stack-unit Status --
------------------------------------------------
Stack-unit State:
Peer stack-unit ID:
Stacking
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
except — show only text that doesn not match a pattern.
find — search for the first occurrence of a pattern.
grep — show only text that matches a pattern.
no-more — do not paginate the output.
save — save the output to a file.
0
0
Active
7.7.1.0
Standby
1
1611