Dell S4810 Reference Manual page 1647

end-day
end-month
end-time
end-year
offset
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Related
calendar set
Commands
clock summer-time recurring
the switch to daylight saving time each year.
show clock
System Time and Date
Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time day month year.
Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
Enter a four-digit number as the year. The range is from 1993
to 2035.
(OPTIONAL) Enter the number of minutes to add during the
summer-time period. The range is from 1 to1440. The
default is 60 minutes.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the hardware clock.
— sets a date (and time zone) on which to convert
— displays the current clock settings.
1647