Ipv6 Ospf Authentication - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

Version 9.1.

Version 7.4.1.0

ipv6 ospf authentication

Configure an IPsec authentication policy for OSPFv3 packets on an IPv6 interface.

ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1}

[key-encryption-type] key}}

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.1.

Open Shortest Path First (OSPFv2 and OSPFv3)

Introduced on the S4810 and Z9000.

Introduced on the S4820T.

Introduced on the E-Series and C-Series.

Causes an authentication policy configured for the area to

not be inherited on the interface.

Security Policy index (SPI) value that identifies an IPsec

security policy. The range is from 256 to 4294967295.

Authentication type: Message Digest 5 (MD5) or Secure Hash

Algorithm 1 (SHA-1).

(OPTIONAL) Specifies if the key is encrypted.

Valid values: 0 (key is not encrypted) or 7 (key is encrypted).

Text string used in authentication.

For MD5 authentication, the key must be 32 hex digits (non-

encrypted) or 64 hex digits (encrypted).

For SHA-1 authentication, the key must be 40 hex digits

(non-encrypted) or 80 hex digits (encrypted).

Introduced on S4810 and Z9000.