Distance - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

distance

Define the administrative distance for learned routes.

distance weight [ip-address mask [prefix-list]]

To return to the default values, use the no distance weight command.

weight = 115

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 6.3.1.0

The administrative distance indicates the trust value of incoming packets. A low

administrative distance indicates a high trust rate. A high value indicates a lower

trust rate. For example, a weight of 255 is interpreted that the routing information

source is not trustworthy and should be ignored.

The administrative distance value indicates the reliability of a

routing information source. The range is from 1 to 255. (A

higher relative value indicates lower reliability. Routes with

smaller values are given preference.) The default is 115.

(OPTIONAL) Enter an IP address in dotted decimal format

and enter a mask in either dotted decimal or /prefix format.

(OPTIONAL) Enter the name of a prefix list name.

ROUTER ISIS (for IPv4)

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Intermediate System to Intermediate System (IS-IS)