Hello Padding - Dell S4810 Reference Manual

Hide thumbs Also See for S4810:

Table of Contents

The running router sets the remaining time value to the current adjacency hold

time. You can override this setting by implementing this command.

Override the default restart-wait time by entering the no graceful-restart

restart-wait command. When you disable restart-wait, the current

adjacency hold time is used.

Set the t3 timer to adjacency on the restarting router when implementing this

command. The restarting router gets the remaining time value from its peer and

adjusts its T3 value so only when you have configured graceful-restart t3

graceful-restart restart-wait

before a restarting peer comes up.

hello padding

Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON

or OFF for LAN or point-to-point hello PDUs.

hello padding [multi-point | point-to-point]

To return to the default, use the no hello padding [multi-point | point-

to-point] command.

point-to-point

Both LAN and point-to-point hello PDUs are padded.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

— enables the graceful restart maximum wait time

(OPTIONAL) Enter the keywords multi-point to pad only

LAN hello PDUs.

(OPTIONAL) Enter the keywords point-to-point to pad

only point-to-point PDUs.

Introduced on the S6000.

Introduced on the S4820T.

Intermediate System to Intermediate System (IS-IS)