Ipv6 Nd Prefix - Dell S4810 Reference Manual

Example Dell(conf-if-te-0/1)#ipv6 nd dns-server 1000::1 1

ipv6 nd prefix

Specify which IPv6 prefixes are included in Neighbor Advertisements.
S4810
Syntax
ipv6 nd prefix {ipv6-prefix | prefix-length | default} [no-
advertise] | [no-autoconfig] [no-rtr-address] [off-link]
[lifetime {valid | infinite} {preferred | infinite}]
Parameters
ipv6-prefix
prefix-length
default
no-advertise
no-autoconfig
no-rtr-address
off-link
valid-lifetime |
infinite
preferred-
lifetime |
infinite
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
IPv6 Basics
Enter an IPv6 prefix.
Enter the prefix then the prefix length. The length range is
from 0 to 128.
Enter the keyword default to set default parameters for all
prefixes.
Enter the keyword no-advertise to prevent the specified
prefix from being advertised.
Enter the keywords no-autoconfig to disable Stateless
Address Autoconfiguration.
Enter the keyword no-rtr-address to exclude the full
router address from router advertisements (the R bit is not
set).
Enter the keywords off-link to advertise the prefix without
stating to recipients that the prefix is either on-link or off-
link.
Enter the amount of time that the prefix is advertised, or
enter infinite for an unlimited amount of time. The range
is from 0 to 4294967295. The default is 2592000. The
maximum value means that the preferred lifetime does not
expire for the valid-life time parameter.
Enter the amount of time that the prefix is preferred, or enter
infinite for an unlimited amount of time. The range is
from 0 to 4294967295. The default is 604800. The
maximum value means that the preferred lifetime and does
not expire.
927