Dell S4810 Reference Manual page 1219

Error Type
Conf-Issue
No-Buffer
Seq-no
Socket
Q-overflow
Unknown-Pkt
Example
Dell#show ip ospf 1 statistics global
OSPF Packet Count
RX 10
TX 10
OSPF Global Queue Length
Hello-Q
LSR-Q
Other-Q
Error packets (Only for RX)
Intf-Down
Wrong-Len
Auth-Err
Version
No-Buffer
Q-OverFlow 0
Error packets (Only for TX)
Socket Errors
Dell#
Usage The show ip ospf process-id statistics command displays the error
Information
packet count received on each interface as:
•
•
•
•
•
•
•
•
Example
Dell(conf-if-te-0/6)#do show ip ospf statistics
(Statistics)
Interface TenGigabitEthernet 0/6
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
The received hello packet has a different hello or dead
interval than the configuration.
Buffer allocation failure.
A sequence no errors occurred during the database
exchange process.
Socket Read/Write operation error.
Packets dropped due to queue overflow.
Received packet is not an OSPF packet.
Total Error Hello DDiscr LSReq LSUpd LSAck
0 8
0 10
TxQ-Len RxQ-Len Tx-Mark Rx-Mark
0 0
0 0
0 0
0 Non-Dr
0 Invld-Nbr
0 MD5-Err
0 AreaMis
0 Seq-No
Unkown-Pkt 0
0
The hello-timer remaining value for each interface
The wait-timer remaining value for each interface
The grace-timer remaining value for each interface
The packet count received and transmitted for each neighbor
Dead timer remaining value for each neighbor
Transmit timer remaining value for each neighbor
The LSU Q length and its highest mark for each neighbor
The LSR Q length and its highest mark for each neighbor
Error packets (Receive statistics)
2 0 0
0 0 0
0 2
0 0
0 0
0 Self-Org 0
0 Nbr-State 0
0 Chksum 0
0 Conf-Issues 0
0 Socket 0
0
0
1219