Test Cam-Usage - Dell S4810 Reference Manual

•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Example
Dell#show qos wred-profile
Wred-profile-name
drop-rate
wred_drop
100
wred_teng_y
100
wred_teng_g
50
wred_fortyg_y
50
wred_fortyg_g
25
ecn
50
Dell#

test cam-usage

Check the Input Policy Map configuration for the CAM usage.
S4810
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Parameters
policy-map
stack-
unitnumber
port-set
portpipe
number
stack-unit all
Defaults none
1366
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the policy map name.
(OPTIONAL) Enter the keyword stack-unit then the stack-
unit slot number.
Enter the keywords port-set then the stack-unit port pipe
number. The range is from 0 or 1.
(OPTIONAL) Enter the keywords stack-unit all to indicate
all stack-unit.
min-threshold max-threshold
0
238
238
238
238
594
max-
0
2378
2378
2378
2378
5941
Quality of Service (QoS)