Dell S4810 Reference Manual page 1459

encryption-
type
password
Defaults No password is configured. level = 15.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
To control access to command modes, use this command to define a password for
Information
a level and use the privilege level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
•
•
Security
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
Enter a text string, up to 32 characters long, as the clear text
password.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password abcd]e, you type "abcd CNTL
v ]e". When the password is created, you do not use the CNTL + v key
combination and enter "abcd]e".
NOTE: The question mark (?) and the tilde (~) are not supported characters.
1459