Tacacs-Server Group - Dell S4810 Reference Manual

tacacs-server group

Creates a group of TACACS servers to be used for Authentication, Authorization, and Accounting..
S4810
Syntax
aaa tacacsgroup group-name
To delete a group of TACACS servers, use the no tacacs-server group
group-name command.
Parameters
group-name
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage If the TACACS group is not configured for Authentication, Authorization, and
Information Accounting, then globally configured TACACS servers are used for the purposes.
When the TACACS group is removed, the AAA configuration is also removed.
Example
Dell(conf)#tacacs-server group group1
Dell(conf-tacacs-group)#tacacs-server host 1.1.1.1 key secret
Dell(conf-tacacs-group)#tacacs-server host 2.2.2.2 key secret
Dell(conf-tacacs-group)#tacacs-server vrf vrf1 source-
interface tengigabitethernet 0/36
Dell(conf)#exit
Dell(conf)#aaa tacacsgroup group1
Related
aaa authentication login
Commands
tacacs-server key
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
S4810
Syntax
debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
1480
Enter the name of the TACACS server group.
Introduced on the S-Series and Z-Series.
— specifies the login authentication method.
— configures a TACACS+ key for the TACACS server.
Security