Trouble Isolation - Konica Minolta bizhub C650 Service Manual

10. Service Mode
B. Self-Cleaning
Functions • This setting allows you to select the self cleaning of the comb electrode section in the
Use • This setting can be used to temporarily stop the self cleaning operation in order to
NOTE
• For color imaging units, the comb electrode section needs to be cleaned by
Setting/ • The default setting is ON.
Procedure
10.8.10

Trouble Isolation

Functions • Individual units and options have a set or unset setting for the trouble isolation func-
Use • When a problem occurs, this function enables the continuous use of the units that are
• The machine isolates only units that have a "set" setting.
NOTE
• The malfunction detection mechanism is not applied to units and options that
• This function can be selected for the following units and options.
2
• Though trouble isolation is not selected, if the specified malfunctions occur on the
See P.605
Setting/ • The default setting is Unset for individual units and options.
Procedure
• After changing the setting, touch [Decision] and turn the main power switch OFF and
492
2
imaging unit /K.
address problems.
ON : The self cleaning operation occurs every 2,700 sheets of print, synchroniz-
ing the transfer belt cleaning operation.
OFF : The machine does not perform the self cleaning operation.
hand every time when a toner cartridge of the corresponding color is replaced.
"ON"
tion.
not affected by separately controlling them and isolating other units that have a prob-
lem.
are being isolated.
Tray 1
Tray 2
Tray 3
Tray 4
LCT
manual
above listed units or options, an alert screen appears and asks users whether to iso-
late the units or options where malfunction occurs.
See the "Trouble shooting" section for the corresponding trouble codes.
Set
ON to make the new setting effective.
Field Service Ver. 8.0 Jun. 2008
OFF
Half-Fold/Tri-Fold Center
Stapling
Post Inserter
Z fold
Punch
Staple
"Unset"
Scanner