Field Service Ver. 8.0 Jun. 2008
6.3.32
Hard disk
1. Open the printer control board assy and put it to the hook of the machine frame.
See the steps 1 to 3 of slide interface board removing procedure.
See P.166
[1]
[1]
[1]
[2]
A00JF2C116DA
[2]
A00JF2C117DA
[1]
A00JF2C118DA
2. Disconnect the connector [1].
3. Remove four screws [1], and remove
the hard disk drive assy [2].
4. Remove four screws [1], and remove
the hard disk drive [2].
NOTE
• When the hard disk is replaced,
select [State Confirmation] →
[Memory/HDD Adj.] → [HDD For-
mat] in Service Mode for logical for-
mat.
6. Other
137