Finisher Rail (Bizhub C451 Only) - Konica Minolta bizhub C650 Service Manual

6. Other
[1]
6.3.21

Finisher rail (bizhub C451 only)

1
[1]
[2]
[1]
[3]
120
1
[2]
[3]
A00JF2C520DA
[3]
A00KF2C501DA
Field Service Ver. 8.0 Jun. 2008
4. Remove two shoulder screws [1] and
two screws [2], and remove the fan
unit [3].
1. If the optional finisher FS-519 is
mounted, remove it.
See P.28 of the FS-519/PK-510/OT-
602 service manual.
NOTE
• After removing the finisher FS-514,
remove four screws [1] and mount-
ing plate [2].
• When reinstalling the mounting
plate, do not secure two lower
screws too tight, and make sure
that the plate and the main unit will
be parallel and the clearance [3]
between those two will be even.