Konica Minolta bizhub C650 Service Manual page 376

Field Service Ver. 8.0 Jun. 2008
(5) Password for Non-Business Hours
Functions • To set whether to input the password before using when the weekly timer is set.
Use • To set the password for turning the power ON temporarily when the weekly timer is
set.
Setting/ • The default setting is No.
Procedure
• When setting to Yes, enter the password (eight digits).
F. Restrict User Access
(1) Copy Program Lock Settings
Functions • To set the prohibition for modifying the registered copy program.
Use • To be used when prohibiting the user from changing the copy program.
Setting/ 1. Touch the key for the appropriate copy program.
Procedure 2. Touch [OK].
(2) Delete Saved Copy Program
Functions • To delete the registered program job.
Use • To delete the registered program job.
Setting/ 1. Touch the appropriate program job.
Procedure 2. Touch [Delete].
3. Touch [Yes] on the check screen to delete the program job.
(3) Restrict Access to Job Settings
• It will not be displayed when the following setting shows that authentication device 1 or
vendor 2 is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
<Changing Job Priority>
Functions
• To set whether to allow or restrict the change on the print priority for the job.
Use
Setting/ • The default setting is Allow.
Procedure
<Delete Other User Jobs>
Functions
• To set whether to allow or restrict job delete by other users when the user is authenti-
cated.
Use
Setting/ • The default setting is Restrict.
Procedure
Yes
"Allow"
Allow
8. Utility Mode
"No"
Restrict
"Restrict"
323