Iu Life Setting; Post Card Transfer Table - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
10.8.11

IU Life Setting

3
• This is displayed only when the function enhanced version 2 or later firmware is installed.
Functions • To set the life threshold for imaging units.
Use • Use this setting when a gap appears between the actual life value of imaging unit and
the life specification value due to the way * a machine is used.
• Comparing the PC drum rotation time with the PC drum rotation time calculated
based on the number of printed pages, the machine detects the end of unit life using
the one that reaches the life specification value earlier.
This setting aims to extend the life threshold for the PC drum rotation time and
achieve a longer imaging unit life.
Normal
Suspend : detects the end of life when a value greater (longer) than the life speci-
*The product specification value is determined based on what types of printing are
made on the machine. If the types of printing made on the machine are different from
the specified printing conditions, the life value of the imaging unit tends to be different
from the life specification value.
See conditions for life specification values in the service manual titled maintenance for
more information on printing conditions.
See P.27
NOTE
• When "Suspend" is selected, images printed after the life specification value
is out of guarantee.
The life counter value of imaging unit is accessed from [Service Mode] →
[Counter] → [Life].
• Before making this setting, be sure to check that the machine does not display
any message that warns each of imaging units, fusing unit, or image transfer
belt unit reaches their life value.
Setting/ • The default setting is Normal.
Procedure
NOTE
• When the setting has been changed, turn off the sub power switch and turn it
on again.
10.8.12

Post card transfer table

Functions • This setting allows you to select the transfer table to be used for thick3 postcards.
Use • For the use of thick 3 postcards, you can select the transfer table suitable for post-
cards.
• This setting is used to improve transfer performance to postcards.
Post.
Thick 3 : The normal thick3 2nd image transfer table is used when printing on thick
Setting/ • The default setting is Thick 3.
Procedure
: detects the end of life when the life specification value is reached.
fication value is reached.
"Normal"
: The postcard 2nd image transfer table is used when printing on thick3
postcards.
3 postcards.
Post.
10. Service Mode
Suspend
"Thick 3"
493
3