Konica Minolta bizhub C650 Service Manual page 417

8. Utility Mode
(6) RAW Port Number
Functions • To set the RAW port number.
Use • To set the RAW port number for the printer.
• Several data can be accepted at the same time by selecting several ports.
Setting/ 1. Select the necessary port number.
Procedure 2. When using the selected port, press the Clear key to clear the value, and enter the
RAW port number using the 10-key pad.
3. Touch [OK].
(7) IP Filtering (Permit Access)
Functions • To set the IP filtering (Permit Access).
Use • To set whether to allow only IP addresses that are within a specified range.
Setting/ 1. Select Enable or "Disable".
Procedure 2. When [Enable] is set, select one from Set 1 to Set 5 and specify the range of IP
addresses to be allowed using the 10-key pad.
3. Touch [OK].
(8) IP Filtering (Deny Access)
Functions • To set the IP filtering (Deny Access).
Use • When [Enable] is set, select one from Set 1 to Set 5 and specify the range of IP
addresses to be allowed using the 10-key pad.
Setting/ 1. Select Enable or "Disable".
Procedure 2. When [Enable] is set, select one from Set 1 to Set 5 and enter the range of IP
addresses to be denied using the 10-key pad.
3. Touch [OK].
364
Field Service Ver. 8.0 Jun. 2008