Memory/Hdd State; Color Regist; Iu Lot No; Adjustment Data List - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008

10.12.10 Memory/HDD State

Functions • To display the condition and amount of the memory and hard disk.
• To display the mounting condition of the optional encryption board (security kit SC-
503).
Use • Use to check the condition and amount of the memory and hard disk.
• Use to setup the optional security kit SC-503.
Setting/ • When the encryption board is mounted, the machine automatically recognizes it and
Procedure displays [Set].

10.12.11 Color Regist

Functions • To check each of C, M, and Y for color shift amount.
• The data is updated after a color shift correction has been made or color shift adjust-
ment has been completed.
Use • Use for check when color shift is evident.
Setting/ • For each of C, M, and Y, the color shift amount (in X and Y directions) at two locations
Procedure (one at the front and the other in the rear) and the difference in color shift amount
between the front and rear (X and Y directions) are displayed.
• Display unit: dots

10.12.12 IU Lot No.

Functions • To display the 10-digit lot number for each of Cyan, Magenta, Yellow, and Black IUs.
• The lot number data is stored in EEPROM of each IU.
Use • Use for checking the IU Lot No.
Setting/ • The IU lot number is displayed even with the front door opened; however, the display
Procedure is blank, since the machine is unable to read the lot number when the main power
switch is turned ON with the front door open. Nonetheless, the lot number will be dis-
played when the front door is closed.
(The engine obtains the IU lot number information when the front door is closed.)

10.12.13 Adjustment Data List

Functions • To display the adjustment and setting value set in the main body.
Use • Use to check the adjustment and setting value set in the main body.
10. Service Mode
535