Konica Minolta bizhub C650 Service Manual page 447

8. Utility Mode
<Scanner Settings: Scanner Information>
3
Functions
• To set the WS scanner information.
Use
Setting/ 1. Touch [Scanner Information].
Procedure 2. Enter the friendly name (up to 63 characters) on the on-screen keyboard, and touch
<Scanner Settings: Connection Timeout>
3
Functions
• To set the timeout period for connection of WS scanner.
Use
Setting/ 1. Press the Clear key.
Procedure 2. Enter the connecting timeout period between 30 and 300 using the 10-key pad.
O. Detail Settings
(1) Device Setting
<MAC Address>
Functions • To display the MAC address of the machine.
Use • To check the MAC address of the machine.
Setting/
• The address cannot be changed.
Procedure
<Network Speed>
Functions • To set the network speed.
Use • To set the specific network speed.
Setting/ • The default setting is Auto.
Procedure
NOTE
• When Network speed setting is changed, turn off the main power switch and
(2) Time Adjustment Setting
Functions • To set whether to enable or disable the NTP setting.
Use • To synchronize the time between the server and the client.
Setting/ • The default setting is OFF.
Procedure
394
3
[OK].
"Auto" 10Mbps Full Duplex
100Mbps Full Duplex 100Mbps Half Duplex
turn it on again more than 10 seconds after.
ON
Field Service Ver. 8.0 Jun. 2008
10Mbps Half Duplex
1Gbps Full Duplex
"OFF"