Field Service Ver. 8.0 Jun. 2008
6.3.87
Tray2 vertical transport motor (M7)
1. Remove the paper feed/transport drive board assy.
See the steps 1 to 9 of high voltage unit/1 removing procedure.
See P.177
2. Remove the LCC drive unit.
See P.146
[1]
[1]
[3]
[2]
[4]
A00JF2C320DA
[2]
A00JF2C321DA
3. Remove two screws [1] and the con-
nector [2].
4. Remove the harness from the wire
saddle [3], and remove the tray 2
vertical transport motor assy [4].
5. Remove two screws [1], and remove
the tray2 vertical transport motor [2].
6. Other
221