Konica Minolta bizhub C650 Service Manual page 367

8. Utility Mode
B. Paper Setting
(1) Paper Tray
Functions • To set the paper feed tray when not specified by the printer driver during PC printing.
Use • To use when paper feed tray cannot be specified by the printer driver when printing
Setting/
• The default setting is Auto.
Procedure
(2) Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
(3) 2-Sided Print
Functions • To set whether to carry out duplex print during PC printing when not specified by the
Use • To use when 2-sided printing cannot be specified by the printer driver while printing
Setting/ • The default setting is OFF.
Procedure
(4) Binding Position
Functions • To set the binding direction during duplex printing when not specified by the printer
Use • To use when binding direction cannot be specified by the printer driver during printing
Setting/ • The default setting is Left Bind.
Procedure
(5) Staple
• bizhub C650/C550 : The menu is available only when the optional finisher FS-517/518/
6
• bizhub C451
Functions • To set whether to staple or not when not specified by the printer driver during PC
Use • To use hen staple is not specified by the printer driver during printing by the Windows
Setting/ • The default setting is OFF.
Procedure
314
6
from Windows DOS, etc.
from Windows DOS, etc.
printer driver.
by Windows DOS, etc.
ON
driver during PC printing.
by Windows DOS, etc.
Top Bind
608 is mounted.
: The menu is available only when the optional finisher FS-517/608 or
FS-519 is mounted.
printing.
DOS, etc.
1 Position
Field Service Ver. 8.0 Jun. 2008
"OFF"
"Left Bind"
2 Position
Right Bind
"OFF"