Konica Minolta bizhub C650 Service Manual page 369

8. Utility Mode
(4) Line/Page
Functions • To set the number of lines per page for printing the text data.
Use • To change the number of lines per page for printing the text data.
Setting/ • Default setting value differs depending on the values by the following two different
Procedure
(5) CR/LF Mapping
Functions • To set the mode for replacing data when printing the text data.
Use • To change the mode for replacing data when printing the text data.
Setting/ • The default setting is OFF.
Procedure
D. PS Setting
(1) Print PS Errors
Functions • To set whether to print or not the error information when an error occurred during PS
Use • To print the information concerning the postscript error.
Setting/ • The default setting is OFF.
Procedure
(2) ICC Profile Settings
2
• To select a profile to be used for print jobs from a computer when a profile
Functions
Use • Possible to set a profile separately for each of the following items.
Setting/ • The default settings are shown below.
Procedure
316
2
settings.
[Utility] → [User Setting] → [Printer Setting] → [Basic Setting] → [Original Direction]
[Utility] → [User Setting] → [Printer Setting] → [Paper Setting] → [Default Paper Size]
Mode 1 : CR → CR-LF LF=LF FF=FF
Mode 2 : CR=CR LF→CR-LF FF→CR-FF
Mode 3 : CR→CR-LF LF→CR-LF FF→CR-FF
OFF : Does not replace
Mode 1 Mode 2
rasterizing.
ON
is not specified by printer driver.
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
Photo-RGB Color
Photo-Output Profile
Text-RGB Color
Text-Output Profile
Figure/Table/Graph-RGB Color
Figure/Table/Graph-Output Profile
Simulation Profile
Field Service Ver. 8.0 Jun. 2008
"60 or 64 lines" (5 to 128)
Mode 3
"OFF"
: Device Color
: Auto
: Device Color
: Auto
: Device Color
: Auto
: None
"OFF"