Konica Minolta bizhub C650 Service Manual page 299

6. Other
B. reinstall procedure
(1) Overall figure
(2) Winding of the scanner drive cables
NOTE
• The scanner drive cable differs in type between the front (silver) and the rear
(black), which are colored differently.
[2]
B
246
<Front>
1. Set the round bead [1] of the scan-
[1]
NOTE
• Make sure that the bead snugly
A
A00JF2C550DA
2. Twist the A side scanner drive cable
NOTE
• Make sure that no part of the cable
[1]
A00JF2C551DA
Field Service Ver. 8.0 Jun. 2008
ner drive cable (silver) to the pulley
[2] at the position as shown in the
illustration.
rests in the slit in the pulley.
around the pulley [1] starting from
the front groove in anticlockwise
direction five times.
rides on the other.
A00JF2C441DA