10. Service Mode; 10.1 Service Mode Function Setting Procedure - Konica Minolta bizhub C650 Service Manual

10. Service Mode

10. Service Mode

10.1 Service Mode function setting procedure

NOTE
• Ensure appropriate security for Service Mode function setting procedures. They
should NEVER be shown to any unauthorized person not involved with service
jobs.
A. Procedure
1. Press the Utility/Counter key.
2. Touch [Details] on meter count display.
3. Press the following keys in this order.; Stop
NOTE
• When selecting [CE Authentication] under [Enhanced Security] available from Ser-
vice Mode, authentication by CE password is necessary.
Enter the 8 digits CE password, and touch [END].
(The initial setting for CE password is "92729272.")
• When the following setting is set to "ON", CE password authentication is neces-
sary.
[Administrator Settings]
• If a wrong CE password is entered, re-enter the right password. The machine will
not enter Service Mode unless the CE password is entered correctly. To return to
the Basic screen, turn OFF the sub power switch and turn it ON again.
When the following setting is set to "Mode 2", operation will be prohibited since it
indicates authentication failure by failing to enter the correct CE password within
the specified number of times.
if the access lock is activated, the lock release timer starts to operate by input the
→ → →
Stop 0 9 3
after the main power switch is turned OFF and On. When the timer reaches the
time specified in this setting, the access lock is released.
• The service code entered is displayed as "
4. The Service Mode menu will appear.
434
→
[Security Settings]
→ →
1 7 in [Meter Count]
Field Service Ver. 8.0 Jun. 2008
→ → → → →
0 0 Stop 0
→
[Enhanced Security Mode]
→ →
[Check Details]
✽
."
1
[Coverage Rate]
A00JF3E534DA