Konica Minolta bizhub C650 Service Manual page 457

8. Utility Mode
(8) Print Separate Fax Pages
• It will not be displayed when [Duplex print (RX)] is set to "ON."
Functions • To set whether to divide the original into pages when it is longer than the standard
size.
Use • To divide the original into pages when it is longer than the standard size.
Setting/ • The default setting is OFF.
Procedure
(9) File After Polling TX
Functions • To set whether to delete the original which polling transmission has been completed.
Use • For not deleting the original which polling transmission has been completed.
Setting/ • The default setting is Delete.
Procedure
(10) No. of Sets (RX)
Functions • To set the number of copies to be printed with the received document.
Use • To use when changing the number of copies to be printed with the received docu-
ment.
Setting/ • The default setting is 1 set.
Procedure
E. Function Settings
(1) Function ON/OFF Setting
<F-Code TX>
Functions
• To set whether to use the F code transmission.
Use
Setting/ • The default setting is ON.
Procedure
NOTE
• When the setting is changed, turn off the main power switch and turn it on
again more than 10 seconds after.
<Relay RX>
• It will be displayed when the following setting is set to "ON."
[Service Mode] → [FAX] → [System] → [Display Setting] → [Relay]
Functions • To set whether to use the relay RX function.
Use • To use the machine as the relay delivery station during relay TX.
Setting/ • The default setting is ON.
Procedure
404
ON
"Delete"
1 to 10 set.
"ON"
"ON"
Field Service Ver. 8.0 Jun. 2008
"OFF"
Save
OFF
OFF