Tray2 Lift-Up Motor (M8) - Konica Minolta bizhub C650 Service Manual

6. Other
[1]
6.3.83

Tray2 lift-up motor (M8)

1. Remove the tray1/2.
See P.121
[3]
[4]
[4]
218
[2]
A00JF2C312DA
[2] [3]
[1]
A00JF2C604DA
[1]
[3] [2]
A00JF2C313DA
Field Service Ver. 8.0 Jun. 2008
6. Remove three screws [1], and
remove the tray1 lift-up motor [2].
2. Disconnect the connector [1] and
remove the harness from the edge
cover [2].
3. Remove two screws [3], take out the
tray2 lift-up motor assy [4] and turn it
around.
4. Disconnect five connectors [1].
5. Remove the harness from the edge
cover [2] and three wire saddles [3],
and remove the tray2 lift-up motor
assy [4].