Konica Minolta bizhub C650 Service Manual page 362

Field Service Ver. 8.0 Jun. 2008
L. Select Tray for Insert Sheet
• It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions
• To select the default setting of the tray for cover sheet paper.
Use
Setting/
• The default setting is Tray 2.
Procedure
M. Tri-Fold Print Side
• It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
• It will be displayed only when the optional finisher FS-608 is mounted.
Functions • Specifies the side of copies to be folded.
Use
Inside
Outside : Folds paper in three with the printed side out.
Setting/ • The default setting is Inside.
7
Procedure
N. Print Jobs During Copy Operation
• It will be displayed only when the following setting is set to "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions • To set whether to accept the printing job for print data or fax data during copy opera-
tion.
Use • To refuse print data or fax data during copy operation.
Accept
Receive Only : Print data or fax data will be printed when the copy operation is fin-
Setting/ • The default setting is Accept.
Procedure
O. Automatic Image Rotation
• [It will be displayed only when the following setting is set to "Level 1" or "Level 2."
[Administrator Settings] → [Security Settings] → [Administrator Security Levels]
Functions
• Sets whether to automatically rotate images to print if the original and specified
paper directions are not consistent with each other.
Use
Setting/ • The default setting is On.
Procedure
: Folds paper in three with the printed side in.
Outside
: Receives the print data or fax data to print.
ished.
"Accept"
"On"
8. Utility Mode
"Inside"
Receive Only
Off
309
7