Konica Minolta bizhub C650 Service Manual page 562

Field Service Ver. 8.0 Jun. 2008
CSRC
No. Parts name
param-
eter
9 29 PI sheet paper feed
clutch (Upper)
10 2A PI sending roller pair/
A (Upper)
11 2B PI sending roller pair/
B (Upper)
12 2C PI reversal rubber
pair (Upper)
13 2D PI torque limiter
(Upper)
14 2E PI sheet paper feed
clutch (Lower)
15 2F PI sending roller pair/
A (Lower)
16 30 PI sending roller pair/
B (Lower)
17 31 PI reversal rubber
pair (Lower)
18 32 PI torque limiter
(Lower)
19 33 PI resist
20 34 FNS output roller/A
21 35 FNS transportat.
roller/4
22 36 FNS transportat.
paper roller/A
23 37 PK counter
24 38 Punch scrap trans-
portation motor pair
25 39 Punch clutch
*1: FS-517 only
*2: FS-608 only
*3: FS-518 only
6
Parts number Limit value
13QN8201 1,000,000 1 count each time a sheet is fed
50BA-574 200,000
13QN-446 100,000
13QN-443 100,000
13QN4073 600,000
13QN8201 1,000,000 1 count each time a sheet is fed
50BA-574 200,000
13QN-446 100,000
13QN-443 100,000
13QN4073 600,000
13QN8201 1,000,000 1 count each time a sheet is ejected
122H4825 100,000
13QE4531 100,000
20AK4210 200,000
A04E00Y001 3,000,000 Number of punching at PK.
(PK-512/513)
12GQ-417 1,000,000
13NKK001 1,000,000
10. Service Mode
Count condition
from the PI upper tray.
from the PI lower tray.
from PI.
1 count for a sheet ejected to the
FNS main tray.
1 count for a set ejected in the sta-
ple mode.
1 count for a sheet in the staple/sad-
dle stitching/half-fold/Tri-fold mode.
1 count for a sheet in the staple/sad-
dle stitching/half-fold/Tri-fold mode.
Number of punching at ZU.
(1) 1 count for a sheet in the punch
mode with ZU mounted but PK not
available
(2) 1 count for a sheet in the Z folding
mode and punch mode with ZU
mounted and PK available
Number of punching at ZU.
(1) 1 count for a sheet in the punch
mode with ZU mounted but PK not
available
(2) 1 count for a sheet in the Z folding
mode and punch mode with ZU
mounted and PK available
509
6