Field Service Ver. 2.0 May 2008
2.3.5
Z folding unit
A. Removal from the finisher
[1]
[2]
[1]
[3]
[1]
A07TF2C500DA
[2]
A07TF2C501DA
[1]
A07TF2C502DA
1. Open the front door of finisher [1].
2. Remove two screws [2] and slide the
finisher as shown in the illustration.
NOTE
• To mount the finisher, align the
hook portions of the mounting
bracket [1] and [2] with the upper
and lower holes [3] in the finisher.
Then, push the finisher toward the
rear.
3. Disconnect three connectors [1] and
remove the finisher.
2. Other
13