System Connection - Konica Minolta bizhub C650 Service Manual

8. Utility Mode
(3) I-Fax Advanced Settings
• It will be displayed only when [Internet Fax] is set to "ON" in the following settings.
[Administrator Settings] → [Network Settings] → [Network Fax Settings] → [Network Fax
Function Settings]
Functions • To set advanced functions of internet fax.
Use
MDN Request
DSN Request
MDN Response
MDN/DSN Response Watch Time : To set the period to observe the response from
Max Resolution
NOTE
• Only MDN Request will be sent when both MDN Request and DSN Request are
set to "ON."
Setting/ • Default settings are shown below.
Procedure
MDN Request
DSN Request
MDN Response
MDN/DSN Response Watch Time : "24 hours" (1 to 99)
Max Resolution
8.6.9

System Connection

A. OpenAPI Settings
(1) Access Setting
Functions • To allow or restrict the access from other systems with OpenAPI when using Page
Scope Data Administrator.
Use • To restrict access from other systems with OpenAPI.
Setting/ • The default setting is Allow.
Procedure
(2) Port Number
Functions • To set the access port for other systems with OpenAPI when using PageScope Data
Administrator.
Use • To change the access port number for other systems with OpenAPI.
Setting/ 1. Select Port No. or Port Number (SSL), and touch [Input].
Procedure 2. Press the Clear key.
3. Enter the port number between 1 and 65535 using the 10-key pad.
414
: To set whether to send MDN (Message Dispo-
sition Notification) request when transmitting
through internet fax.
: To set whether to send DSN (Delivery Status
Notification) request when transmitting through
internet fax.
: To set whether to response for MDN request
made by the other machine when receiving
through internet fax.
the other machine when sending MDN/DSN
request. In the case of time over, time out mes-
sage is notified.
: To set maximum resolution for reading, TX/RX
and record when internet fax function is being
used.
: "ON"
: ON
: "ON"
: 400 x 400
"Allow"
Field Service Ver. 8.0 Jun. 2008
OFF
"OFF"
OFF
OFF
"600 x 600"
Restrict