6. Other
[3]
6.3.58
Operation panel I/O board (OPIOB)
1. Remove the LCD module.
See P.122
[1]
[3]
[4]
6.3.59
Paper size detect board/1 (PSDTB/1)
1. Remove the tray1/2.
See P.121
[3]
[4]
188
[2]
[1]
A00JF2C239DA
[2]
A00JF2C240DA
[2]
[3]
[1]
A00JF2C310DA
Field Service Ver. 8.0 Jun. 2008
6. Remove two bolts [1] and three
screws [2], and take out the opera-
tion panel control board [3].
2. Remove two screws [1] and the con-
nector [2], and take out the operation
panel I/O board [4] as holding the
sub power switch [3].
2. Disconnect the connector [1] and
remove the harness from the edge
cover [2].
3. Remove two screws [3], take out the
tray1 lift-up motor assy [4] and turn it
around.