Replacing The Transfer Belt Unit - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
3.5.22

Replacing the transfer belt unit

A. Periodically replaced parts/cycle
• Transfer belt unit: Every 450,000 prints
B. Procedure
1. Open the upper right door.
[1]
[1]
[1]
A00JF2C046DA
[2]
A00JF2C047DA
A00JF2C048DA
3. Periodical check
2. Remove the screw [1] and the upper
right door stopper.
3. Loosen the shoulder screw [1] and
slide the image transfer entrance
guide stopper [2] towards the back of
the main body.
4. Slide the image transfer entrance
guide [1] towards the back of the
main body and remove it.
NOTE
• Slide the image transfer entrance
guide [1] towards the back of the
main body and remove it.
55