Field Service Ver. 8.0 Jun. 2008
6.3.54
High voltage unit/1 (HV1)
1. Remove the upper rear cove /1, upper rear cover /2 and lower rear cover.
See P.116
2. Remove the rear right cove /1, rear right cove /2, rear right cove /3 and rear right cove /
4.
See P.115
3. Remove the DC power supply.
See P.160
4. Open the PWB box.
See P.172
[2]
[1]
[2]
[1]
[1]
A00JF2C210DA
[1]
A00JF2C211DA
5. Remove the harness from eight wire
saddles [1] and three edge covers
[2].
6. Remove all connectors and the flat
cable on the paper feed/transport
drive board [1].
6. Other
177