Konica Minolta bizhub C650 Service Manual page 263

6. Other
[1]
[4]
[1]
[3]
[4]
[1] [2]
210
[2]
[3]
A00JF2C287DA
[2]
[1]
A00JF2C288DA
[1]
[3]
A00JF2C289DA
Field Service Ver. 8.0 Jun. 2008
3. Disconnect the connector [1],
remove the harness from the wire
saddle [2].
4. Remove two screws [3] and take out
the pressure welding alienation sen-
sor assy [4].
5. Remove two screws [1] and the
spring [2], and remove the gear
cover [3].
NOTE
• Make sure not to lose the spring.
6. Remove two E-rings [1], the collar [2]
and the rotating knob [3], and
remove two gears [4].