10. Service Mode
10.8.3
Serial Number
Functions
• To register the serial numbers of the machine and options.
• The numbers will be printed on the list output.
• To use the serial number as machine ID during CS Remote Care communication.
Use
• Upon setup.
NOTE
• When main power switch was turned ON while the serial No. was not entered,
• Do not change the serial number registered in the machine. If memory data is
• The serial number of "Printer" can be checked through the following:
3
Setting/
• Type the serial numbers.
Procedure
10.8.4
No Sleep
Functions
• To display the option of "OFF" for the sleep mode setting screen available from
Use
• To display the option of "OFF" for the sleep mode setting.
NOTE
• The sleep mode will begin in 48 hours even if it sets it to "OFF."
Setting/
• The default setting is "Prohibit."
Procedure
10.8.5
Foolscap Size Setting
Functions
• To set the size for foolscap paper.
Use
• Upon setup.
• To change the size for foolscap paper.
Setting/
• Select the size from among the following five.
Procedure
10.8.6
Original Size Detection
Functions
• To change the document size detection table.
Use
• Use to change the setting for the document size detection table.
Setting/
<Copy Glass>
Procedure
• The default setting is "Table1."
NOTE
• Table 2 can be set only when original size detection 2 sensor is being
490
3
the message to require entering the serial No. will be displayed.
lost and entering the serial number is required, enter the original correct serial
number.
Be careful to enter the correct serial number since characters other than
alphanumeric can be also entered. CSRC communication is not available if a
wrong serial number is entered.
[Utility] → [Meter Count] → [Check Details].
Printer, Scanner, ADF, LCT, Sorter/FN, Duplex, Vendor, Fax1, Fax2, RU,
ZU (Not used)
administrator settings.
Permit
220 x 330 mm
8
1
/
x 13
2
Copy Glass : To change the size detection table for the document glass.
"Table1"
mounted.
Field Service Ver. 8.0 Jun. 2008
"Prohibit"
8
1
/
x 13
8
1
/
x 13
1
/
4
8
Table2
8 x 13
4