Konica Minolta bizhub C650 Service Manual page 394

Field Service Ver. 8.0 Jun. 2008
(11) Line Detection
<Prior Detection Setting>
Functions • To set whether or not to perform pre-detection of stain on the ADF original glass.
• To set the detection level of the pre-detection of stain on the ADF original glass.
• To set how to display the warning when stain on the ADF original glass is detected.
Use • Use when changing the display of the warning which requests the cleaning of the
stain on the glass detected by the pre-detection of the lines.
TYPE1 : Warning will be displayed by the maintenance mark. (warning code: D-1/
TYPE2 : Warning will be displayed on the message area on the basic screen.
TYPE3 : Warning will be displayed on all screens.
OFF
2
• Use when changing the detection level for the pre-detection of stain on the original
glass.
Low
Normal : Normal detection level
High
Setting/ • The default setting is Yes.
Procedure
NOTE
• [Warning Level] and [Detection Level] can be set when "Yes" is selected.
• Be aware that selecting "No" and performing the pre-detection with the follow-
ing setting will display "NG."
[Service Mode] → [Machine] → [Split Line Prior Detection]
• When "No" is selected, the original glass cleaning operation after the job ends
does not operate.
<Warning Level>
2
• The default setting is TYPE2.
<Detection Level>
• The default setting is Std.
D-2)
: Warning will not be displayed.
: Stain on the glass will not be detected easily.
: Stain on the glass will easily be detected.
"Yes"
TYPE1 "TYPE2"
Low
No
TYPE3
"Std."
8. Utility Mode
OFF
High
341
2