Copier Settings - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
F. Left Panel Display Default
Functions • Specifies an item that is shown as a default on the left panel display.
Use • To change the item that is shown as a default on the left panel display.
Job List (List Display)
Job List (Status Display) : Displays the status of jobs that are being processed.
Check Job Settings
Setting/ • The default setting is Job List.
Procedure
G. Search Option Settings
3
• This is displayed only when the function enhanced version 2 or later firmware is installed.
(1) Uppercase and Lowercase Letters
Functions
• Select whether or not to differentiate between upper case and lowercase letters.
Use
Setting/ • The default setting is Differentiate.
Procedure
(2) Search Option Screen
Functions • Select whether or not to display [Uppercase and Lowercase Letters] setting in the
advanced search.
Use
• Displaying the search option screen allows changing the search criteria for an indi-
vidual search.
Setting/ • The default setting is Off.
Procedure
8.5.3

Copier Settings

A. Auto Booklet ON when Fold & Staple
• bizhub C650/C550 : It will be displayed only when the optional finisher FS-608 is
• bizhub C451
3
Functions • To set whether to set the auto booklet when fold & staple is selected.
Use • To cancel setting the auto booklet when fold & staple is selected.
Setting/ • The default setting is Auto Select Booklet.
Procedure
B. Auto Zoom for Combine/Booklet
Functions
• To set whether to select the appropriate magnification when combine or booklet is
selected during auto paper select.
Use
Setting/ • The default setting is Auto Display Zoom Ratio.
Procedure
: Displays a list of jobs that are both being printed and
waiting to be printed.
: Displays the setting of the copy job that is being printed.
"Job List."
"Differentiate"
On
mounted.
: It will be displayed only when the optional finisher FS-608 or the
optional saddle stitcher SD-505 is mounted.
"Auto Select Booklet"
"Auto Display Zoom Ratio"
8. Utility Mode
Check Job Settings
Do Not Differentiate
"Off"
OFF
OFF
305
3