Field Service Ver. 8.0 Jun. 2008
[1]
[1]
[2]
[1]
[2]
[1]
A00JF2C178DA
A00JF2C179DA
[1]
A00JF2C180DA
3. Remove the harness from eleven
wire saddles [1].
NOTE
• When reinstall the harness, set the
ferrite core [2] and route the har-
ness as shown in the illustration on
the left.
4. Remove all the connectors on the
printer control board [1].
5. Remove eight screws [1], and
remove the printer control board [2].
NOTE
• When the printer control board is to
be replaced, rewriting the firmware
to the latest one.
6. Other
165