3. Other
24
[2]
[1]
A03NF2C017DA
[1]
[2]
A03NF2C037DA
[1]
A03NF2C038DA
Field Service Ver. 3.0 May 2007
17. Set the auxiliary wire [1] on the front
face to the hook of the slide spring
[2].
18. Mount the wire holding jig [1] and
secure it with the E-ring [2].
NOTE
• Check to make sure that the wire
hook [1] is at the position shown on
the picture when the tray assy is at
the lower end.