Lu Drive Board - Konica Minolta bizhub C650 Service Manual

3. Other
[1]
3.3.8

LU drive board

1. Remove the right cover.
See P.10
2. Remove the rear cover.
See P.12
[1]
[2] [1]
26
A03NF2C510DA
[3] [2]
A03NF2C041DA
Field Service Ver. 3.0 May 2007
NOTE
• The rib edge [1] of the rotation plate
must be around the dotted lines as
shown in the picture when the tray
Assy is at the lowest level.
22. For the rest of the procedure for
mounting, take the reverse steps
from disassembling.
3. Disconnect five connectors [1],
remove four screws [2] and remove
the LU drive board [3].